304 stainless steel sheet | Precautions for cutting

Large quantities of 304 stainless steel plates should be cut with automatic pipe cutting machines as much as possible. The automatic pipe cutting machines are controlled by servo motors, which are several times high and reach the wire level. The cutting tools used are high-speed steel saw blades. Ordinary grinding wheel blades, high-speed steel saw blades, vibration cutting are all available, and wire cutting is highly accurate. What are the precautions for cutting 304 stainless steel sheet? ? How much do you know about this problem?

1. Manual lubrication should be carried out continuously during mechanical cutting, and the metal debris on the knife edge should be clear, so as not to affect the cutting effect;

2. To leave a margin, such as mechanical cutting, the knife edge should have some width, and only leave enough margin to make the length of the pipe sufficient, and you can adjust the 304 stainless steel plate mouth;

3. 304 stainless steel plates should be placed horizontally, and the diameter direction should be parallel to the cutting knife, that is, the knife should be perpendicular to the longitudinal direction of the pipe, so that the diameter of the stainless steel plate is flat.